Ensure your pressure equipment meets EU safety rules (PED 2014/68/EU).

 

Avoid costly EU border delays with expert support in risk classification, conformity assessment, CE marking, harmonised standards, and notified bodies, from design to declaration.

​

------

---

## Who this applies to

If you manufacture or import pressure vessels, boilers, piping, pressure accessories, or safety accessories, you must comply with these regulations. Assemblies containing pressure-bearing items that are intended for use in the EU market are also subject to these requirements.

---

---

## What we do: PED certification services

Conduct a scope and applicability check to determine if your product is subject to PED requirements and which items are covered, including vessels, accessories, piping, and assemblies.
Perform risk categorization by classifying products into PED categories (I–IV) based on maximum allowable pressure, volume, nominal size, and intended use. The assigned category dictates the required conformity module.
Prepare a technical file containing detailed drawings, pressure and stress calculations, material certificates, test reports, welding procedures, and non-destructive testing records.
Map applicable EN standards to ensure presumption of conformity, or provide substantiated justification for alternative approaches. Apply harmonised standards to streamline compliance.
Coordinate all material tests, pressure tests, non-destructive procedures, and factory inspections as required by the relevant conformity assessment module.
Engage an EU Notified Body for third-party assessment in higher risk categories. Select and liaise with the appropriate body as dictated by conformity requirements.
Finalise CE marking and sign the EU Declaration of Conformity. Retain technical documentation and the declaration for the legally required retention period and ensure readiness for authority review.

---

## PED conformity procedures (overview)

The PED classifies equipment into categories I to IV. This classification is based on factors such as pressure, volume, size, and hazard level. As the category number increases, the conformity assessments become more stringent.
Demonstrate conformity using modules defined in Annex III. Options include internal production control, type examination, and module combinations involving factory production control and notified-body testing. In certain categories and modules, Notified Body oversight is required.

---

## Harmonised standards & presumption of conformity

EN standards listed in the Official Journal confer presumption of conformity with essential safety requirements in Annex I of the PED. Using harmonised standards simplifies compliance. If not applied, manufacturers must demonstrate equivalence by alternative means. Maintain an up-to-date standards list according to European Commission updates.

---

Receive a gap analysis report, a compliance roadmap, and an expertly crafted technical file and compliance matrix. Our technical file, a flagship deliverable, is designed to be your comprehensive compliance tool, meticulously prepared to streamline your certification process. This vital document includes all necessary components, such as detailed pressure and stress calculations, material certificates, and test reports. The compliance matrix provides a clear overview of conformity requirements against your product specifications. Example entries might detail how specific harmonised standards align with pressure equipment requirements or describe applicable risk category assessments. Additionally, benefit from comprehensive test coordination and witness plans, complete submissions, and project liaison with Notified Bodies when required. Our services also include CE marking artwork, EU Declaration of Conformity templates, and post-market support, including change management, audits, and market surveillance responses.

## FAQs (with concise, authoritative answers)

**Q: Which products fall under PED?**
Pressure vessels, steam boilers, piping, pressure accessories, safety accessories, and assemblies with maximum allowable pressure above 0.5 bar fall under PED. For example, pressure vessels, valves, and safety relief devices are included.

Manufacturers must retain technical documentation and the EU Declaration of Conformity for a period set by national transposition, often ten years for many product categories. For instance, in Germany, the retention period for industrial pressure equipment is frequently set to ten years, while in France, it may range from five to ten years depending on the product type. It is essential to check and comply with specific legal retention requirements and guidance applicable to your country and product category.

**Q: What are PED categories and why do they matter?**
The PED organizes equipment into risk-based categories (I–IV) based on pressure, volume, nominal size, and fluid type. The assigned category specifies the conformity assessment module and Notified Body involvement. Higher risk categories require increased third-party scrutiny.

**Q: Do I always need a Notified Body?**
Notified Body involvement is not universal. Its necessity is determined by the equipment risk category and chosen conformity assessment module. While low-risk items may operate solely under internal production controls, higher categories require Notified Body assessment.

**Q: What is the role of harmonised standards?**
Harmonised standards provide automatic presumption of conformity with the essential requirements of PED. Applying these standards streamlines compliance, and the authoritative list is published in the Official Journal.

Manufacturers must retain technical documentation and the EU Declaration of Conformity for a period set by national transposition, often ten years for many product categories. It is essential to check and comply with specific legal retention requirements and guidance.

---

## Blog ideas (SEO-friendly)

1 Informational:

  -. “PED 2014/68/EU Explained: Which Pressure Equipment Needs CE Marking?”   - “Top 8 Harmonised Standards for Pressure Equipment and Why They Matter”

​

2. Problem-solving:

  - “How to Classify Your Pressure Vessel: A Step-by-Step Guide to PED Categories”

  - “Welding, NDT and Material Certificates: PED Evidence That Auditors Want”

  - “Preparing a PED Technical File: Templates & Common Pitfalls”

 

3. Transactional:

  - “

  -. “From Design to Market: The PED Conformity Assessment Path for Assemblies”   -. “Case Study: How Company X Achieved PED Certification in 12 Weeks-

## FAQ Schema / Quick Snippets (for SERP)

* Short Q&A snippets are included in the FAQ above. Use structured data (JSON-LD below) to improve search engine visibility.

---

## Suggested on-page SEO elements & keywords

Primary keywords: PED certification, Pressure Equipment Directive, 2014/68/EU, pressure equipment CE marking, EU pressure vessel law, PED Module B testing

Secondary keywords: PED conformity assessment, harmonised standards PED, PED notified body, pressure vessel certification EU
**H1:** PED Certification — Comply with the European Pressure Equipment Directive (2014/68/EU)
**H2s:** Why PED matters, Who this applies to, Our services, Conformity procedures, Harmonised standards, FAQs, Blog ideas
**Image alt text examples:** “Pressure vessel CE marking PED compliance”, “PED conformity assessment flowchart”, “Notified body inspection of pressure equipment”

---

## Conversion & trust signals

Enhance engagement with trust signals and fast contact. Use partner logos, case studies, checklists, and a streamlined form to support quick assessments. We have several anonymized case studies available, highlighting successful PED certification journeys from other manufacturers, offering real-world insights into the process. Manufacturers value seeing these success stories, providing reassurance and tangible examples of the benefits of PED certification.

---

## JSON-LD (Organization + Service + FAQ) — copy/paste

```json
{
"@context": "https://schema.org",
"@type": "Service",
"name": "PED Certification",
  "description": "Certification and conformity assessment support for Pressure Equipment Directive (PED) 2014/68/EU, including risk classification, technical files, notified body liaison, testing and CE marking.",  "provider": {
   "@type": "Organization",
   "name": "Your Company Name",
   "url": "https://yourdomain.example/ped-certification"
},
"areaServed": "EU",
"serviceType": "Regulatory compliance / PED certification",
"faq": [
   {
     "@type": "Question",
     "name": "Which products fall under PED?",
     "acceptedAnswer": {
       "@type": "Answer",
       "text": "Pressure vessels, boilers, piping, pressure accessories, safety accessories and assemblies with maximum allowable pressure greater than 0.5 bar."
     }
   },
   {
     "@type": "Question",
     "name": "Do I always need a Notified Body?",
     "acceptedAnswer": {
       "@type": "Answer",
       "text": "Not always. Notified Body involvement depends on the equipment risk category (I–IV) and conformity module required."
     }
   }
]
}
```

---

## Legal & regulatory notes (short)

* The official EU reference for the PED and the list of harmonised standards is maintained by the European Commission. Always verify the latest Official Journal references when preparing a technical file. ([single-market-economy.ec.europa.eu][1])

---

## Ready-to-use content snippets (for marketing)

**Hero CTA text:** “Request a Free PED Gap Assessment. Upload basic product data and we’ll tell you the likely category and next steps.”
**Footer legal line:** “All advice provided is informational and should be validated against the latest EU Official Journal and your chosen Notified Body’s interpretation.”

---

## Sources & further reading (authoritative)

* European Commission — Pressure Equipment Directive (overview & scope). ([single-market-economy.ec.europa.eu][1])
* Summary lists of harmonised standards for PED (EU Commission consolidated lists). ([single-market-economy.ec.europa.eu][5])
* Conformity modules and category guidance (industry guidance / Annex III explanation). ([ACI Industriearmaturen GmbH][6])
* Harmonised standards guidance and presumption of conformity. ([PED - Pressure Equipment Directory][8])
* Industry certification providers and practical guides (Intertek / TUV / DNV pages on PED). ([Intertek][4])

---

Next steps: We can tailor this page copy to your company by adding your logo, contact details, client logos, and tone. We can create a downloadable technical file checklist PDF based on your product type, or convert this page to Wix or WordPress HTML, or even a one-page React component. Which of those would you like next?

[1]: https://single-market-economy.ec.europa.eu/sectors/pressure-equipment-and-gas-appliances/pressure-equipment-sector/pressure-equipment-directive_en?utm_source=chatgpt.com "Pressure Equipment Directive"
[2]: https://www.tuvsud.com/en-us/services/product-certification/pressure-equipment-directive-2014-68-eu?utm_source=chatgpt.com "Pressure Equipment Directive (PED) 2014/68/EU"
[3]: https://ll-c.org/ce-marking/pressure-devices/?utm_source=chatgpt.com "Directive 2014/68/EU on Pressure Equipment"
[4]: https://www.intertek.com/product-certification-marks/pressure-equipment-directive/?utm_source=chatgpt.com "Pressure Equipment Directive (PED) - Conformity ..."
[5]: https://single-market-economy.ec.europa.eu/single-market/goods/european-standards/harmonised-standards/pressure-equipment_en?utm_source=chatgpt.com "Pressure equipment - Internal Market, Industry ..."
[6]: https://aci24.com/en/help-center/what-is-the-pressure-equipment-directive-ped-2014-68-eu/what-does-the-conformity-assessment-procedure-according-to-category-i-module-a-include.html?utm_source=chatgpt.com "Conformity Assessment Procedure Category I Module A ..."
[7]: https://www.tuv.com/content-media-files/master-content/services/industrial-services/i01-pressure-equipment/1826-pressure-equipment-directive/tuv-rheinland-ped-pressure-equipment-certification.pdf?utm_source=chatgpt.com "The Pressure Equipment Directive 2014/68/EU"
[8]: https://ped-online.com/harmonised-standards-and-specifications/?utm_source=chatgpt.com "Harmonised standards and specifications"